Diamondback® Tactical Second Focal Plane 4-12x40
Exposed tactical turrets built for dialing elevation and windage allow quick and precise bullet drop and wind drift compensation at extended ranges. When we say precise - we mean it. These turrets track better than any Bloodhound and reliably return to zero every time. A zero-reset feature lets you re-index the zero reference marks on both turrets after sight in, while fiber optic rotation indicators integrated into the turrets provide a visual cue of your turret’s position.
- Lens Covers
- Lens Cloth
- Tools
Magnification 4-12x
Objective Lens Diameter 40 mm
Eye Relief 3.9 inches
Field of View 23.6-7.9 ft/100 yds
Tube Size 1 inch
Turret Style Tactical
Adjustment Graduation 1/4 MOA
Travel Per Rotation 12 MOA
Max Elevation Adjustment 70 MOA
Max Windage Adjustment 70 MOA
Parallax Setting 100 yards
Length 14.2 inches
Weight 16.2 oz
Product Manual (PDF) Download
Reticle Manual (PDF) Download
Accessories
Precision Matched Ring Set
When accuracy counts these are your go to rings.
Machined with certified USA 7075 T6 billet aluminum and held to an extremely tight tolerance of .0005 inches using a precision Computer Numeric Controlled (CNC) mill. These Vortex rings are then serialized, vibratory tumbled, bead blasted and finished with a Type III hard coat anodize.
- Rugged, lightweight, anti-snag design
- Robust, Grade 8 fasteners
- 100% made in USA guaranteed for life
Torque Specs
Base Clamp Screws 45-50 in/lbs Ring Screws 15-18 in/lbs
Tactical Scope 30mm Rings - Pair
The Vortex Picatinny-style ring(1) features a wide six-screw design for additional surface area to keep your optic true under the even the hardest hitting recoil of today's rifles. These are individual rings that are ideal for mounting 30mm tube red dots or magnifiers, and are available in a variety of heights for a custom fit and feel. When two individual rings are purchased, these Picatinny style rings are a perfect mounting solution for rifle scopes on an AR-15 platform.
Ring Height:(measured from base of ring to center of scope tube)
- Low: 0.83"
- Medium: 0.97"
- High: 1.18"
- Extra-High (Absolute Co-Witness): 1.46"
- Extra-High ( Lower 1/3 Co-Witness): 1.57"
Notes:
- Rings sold as a pair
- Fits standard 1913 Picatinny-style rails
- Mounting hardware included
- Limited Lifetime Warranty
One Piece MOA Precision Scope Mounts
Only a few left!
Tight and Precise! These high quality precision scope mounts are the answer when trying to take your shooting game to the next level. Light Weight and Built Tough right here in the USA!
These mounts have MOA Risers Built right in. Maximizing the internal turrets system of your scope and reaching to new further distances without having to hold over.
They fit and lock on to any Picatinny Rail System.
Scope Sizes 30mm - 36mm
Mount Types - Standard and Cantilever
**NEW** All Mounts now come Standard with Light Weight design.
Scope Mounts Come in Blasted Aluminum Finish. They can be Coated to any color. For custom colors please note designated color code in notes field of order or contact us direct.
Pro Series Rings
The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency. Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.
- Type 2 Matte Black Anodized
- Laser Engraved Torque Specifications
- Integrated Recoil Lug
- Made in the USA
- Solid In Pairs
Sport Cantilever Mount
Vortex cantilever ring mounts provide the correct height and forward placement for proper scope mounting on flattop ARs. Available for 1 Inch & 30mm tubes in 2 inch or 3 inch offset.
Precision Extended Cantilever Mount
Precision Extended Cantilever Mount
Available in several different sizes with options for 0 or20 MOA cant. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.
Precision Rings
New for 2020, Athlon Precision Rings are Made in the USA from High Strength Aluminum Alloy. Designed for precision rifles including magnum calibers.
A four screw ring cap design paired with a single nut base and recoil lug cross-bolt. A scalloped profile increases surface area in the rings flex points while reducing mass, ensuring these rings will hold your scope tight!
Steel recoil lug machined into cross-bolt
4-screw cap retention
High strength aluminum construction
Increased mating surface area
Hard anodized matte finish
Compatible with weaver and picatinny rails
Ring Screw Torque Spec 18-20 in/lbs
Nut Torque Spec 65 in/lbs
Bubble Levels
For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.
Mounts quickly and easily to the riflescope tube.
TACTICAL - Strike Industries Adjustable Scope Mount
The Strike Industries Adjustable Scope Mount (ASM) combines different eye relief options into one scope mount. The ASM can be set to one of four (4) Standard, Extended, Intermediate Extended and Hyper Extended positions. The ASM is CNC machined from 7250 aluminum and hard anodized in black. 7250 aluminum excels in applications requiring lightweight and high strength. Intended for use with Picatinny rail section rifles. The versatility of the Strike Industries Adjustable Scope Mount allows users to adjust the scope away from the shooter and also closer to the shooter when mounted in reverse for a hunting rifle setups, creating flexibility for various eye relief and scope positions.
Package Includes:
- 1x Base
- 2x Clamps
- 2x Scope Rings
- 2x M5 x 27mm
- 3x M4 x 5 mm
- 8x M3 x 10 mm
- 1x 4mm Allen Key
- 1x 3mm Allen Key
- 1x 2.5mm Allen Key
- 2x Scope Ring Reducer Pairs
- 1x Cantilever
- 1x Loctite
Product Spec
- LENGTH 143 mm
- WIDTH 45 mm
- HEIGHT 63 mm
- WEIGHT 7.6 oz
Product Features:
- 30mm scope mount with optional ring reducers for (25.4mm/1 inch) scopes
- Various eye relief positions available
- 7250 aluminum excels in applications requiring lightweight and high strength
- CNC machined
- Reverse mount for a closer eye relief in hunting rifle setups
- Four (4) positions: Standard, Extended, Intermediate Extended and Hyper Extended
Precision QR Extended Cantilever Mount
Precision machined from 6061 T6 aluminum.
Hard coat Type 3 Mil-Spec anodized for a lifetime of performance.
Torque Wrench
Tighten to the specified torque and not a smidgen more! Adjustable in 1 in/lb increments, this tool is easy to read, simple to set, and offers fast, accurate tension whenever and wherever you need it.
Vortex Optics Scope Ring Mounting Kit
Everything you need to mount your Scope!
This Fix-It-Sticks Scope Mounting Kit is custom made for BRINK EXCURSIONS to have everything you need to mount Vortex OpticsBrand Rings and many other brands. Comes all in an easy to carry Mollie mount travel pouch with a font magnetic patch to keep track of all your hardware while mounting so not to lose anything.