Fix It Sticks SCOPE JACK
Fix It Sticks Scope Jack
A new way to level your optic, the Fix It Sticks Scope jack works with any 1/4 inch driver to quickly and easily level your scope to your NATO/Pic rail.
Just mount the scope jack to the NATO/pic rail under your scope and turn the drive handle until the lifting arm engages with the flat section under your turrets. Once the scope is level, maintain pressure while tightening your ring screws to keep optic level throughout the process.
Requirements:
- Works with any scope with a flat section under turrets
- Needs a minimum of 1/4 inch clearance between NATO/Pic rail and scope
- NATO/Pic rail must be accessible under optic
- In cases of minimal clearance, it may be necessary to remove the thumb screw and clamp, then slide the Scope Jack onto the rail from the side and reassemble.
Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Driver.
Fix It Stick Scope Jack Instruction Video |
Click Here |
Customer Photos
Related Products
Torque Limiters
Just Grab and Go!
Torque Limiter prevents over-tightening of fasteners.
When Inch Lbs is reached:
Audible "Click" is heard.
- Limiter "spins" preventing further torque from being applied.
Features
- Accepts any standard 1/4" bit
- Fits into any standard 1/4" driver
- +/- 6% Accuracy
- Retains accuracy for 20,000 cycles on Small Limiters
- Retains accuracy for 5,000 cycles on Large Limiters
- Integrates perfectly with Fix It Sticks Replaceable Edition for field / travel use.
- Integrates perfectly with T-Way Wrench for shop use.
T-Way Wrenches
T-shape wrenches are for those who want a true control experience.
We have selections of modular to fixed options pending if they are going to be in a Go-Bag or at back on the work bench at the shop.
Vortex Optics Scope Ring Mounting Kit
Everything you need to mount your Scope!
This Fix-It-Sticks Scope Mounting Kit is custom made for BRINK EXCURSIONS to have everything you need to mount Vortex OpticsBrand Rings and many other brands. Comes all in an easy to carry Mollie mount travel pouch with a font magnetic patch to keep track of all your hardware while mounting so not to lose anything.
Athlon Optics Armor Scope Ring Mounting Kit
Everything you need to mount your Scope!
This Fix-It-Sticks Scope Mounting Kit is custom made for BRINK EXCURSIONS to have everything you need to mount Athlon Armor Brand Rings and Cantilever Mounts and many other brands. Comes all in an easy to carry Mollie mount travel pouch with a font magnetic patch to keep track of all your hardware while mounting so not to lose anything.
FIX IT STICKS Mini All-In-One Torque Driver
Tighten down your scope rings, red dot sights, mounting plates, etc. while in the field, at the range, or at home. No more over or under tightening your critical components.
Just turn the drive handle until the hash mark lines up with the torque value you need (from 6 - 25 inch-lbs).
Features
- Accepts any standard 1/4" bit
- Fits into any standard 1/4" driver
- +/- 10% Accuracy
Please note that the Mini All-in-One Torque Driver operates differently than our Torque Limiters. For instructions and instructional video, please click here.